Chevron Gasoline Lightbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for my Chevron Gasoline Lightbox for the garage or mancave swag, for those who just collect the signs.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my Chevron Gasoline Lightbox and what I used to assemble it. The stand in the image was not part of this design but a simple prop.
Bambu Labs P1S/AMS
- .04 Nozzle
- 10% Gyroid Infill
Filaments used for this project:
- Elegoo PLA - White
- Elegoo PLA - Black
- Elegoo PLA - Dark Blue
- Overture PLA - Fresh Red
Software:
-Fusion360
-Bambu Studio
Materials:
-LED kit (1 meter) - white or RGB
-Power source via USB or AC adapter (Usually supplied with kits)
Tools:
-Glue gun with glue sticks
-Hobby knife
-Soldering iron with solder (If required for assembling led kit)
-Scissors
-Super glue
***Use “Caution” when handling “sharp” tools, “hot” equipment and electrical devices - follow your led kits user manual for installation.
I hope you enjoy this lightbox as much as I do and save a spot in you man-cave for more to come.
I greatly appreciate a ”follow” as it would help to inspire me to release more content throughout this journey, as always thank you for stopping by.