1 / 2
Creality K1C - Rear Betweener Plate and Front Riser — zdjęcie 1
1 / 2

Creality K1C - Rear Betweener Plate and Front Riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rear betweener plate to fit the filament tube for the Creality K1C and thinner Front risers.

Ocena
0 / 5
Polubienia
13
Pobrania
103
Wydruki
0
Wyświetlenia
952
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I found that the rear plate didn't fit the K1C due to the cable guide. So this is the rear betweener plate for the Creality K1 Riser design from Joe Cooper. 

Also, I made thinner Front risers, to avoid the printer head touching the risers.