Metal Slug: Death Angel game box for sleeved cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box to store the highly regarded Print and Play game Metal Slug: Death Angel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Metal Slug: Death Angel is a Print and Play game with a bit of a cult following. My build didn't fit the existing designs, so here's something that I've put together in the hope of making the game a little easier to set up.
The pull out tray for the smaller enemy cards fits cards with sleeves up to ~72 x ~47 mm in two stacks; one can be used for discards during play.
The box holds large cards in sleeves up to ~91 x ~61 mm in one stack, as well as the other tokens and dice for the game.
There's also a lid; I've given it 1mm of clearance in both directions and very thin walls, in hopes of making it fit easily. I've included some simple text on the lid - it's probably best to print this face on the build plate, so expect to be pulling any support material out…