ADXL S2DW Bed Clip Mount Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ADXL S2DW Bed Clip Mount
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a remix of the ADXL Bed Clip Mount by joshhead on Thingiverse: https://www.thingiverse.com/thing:4977191
I downloaded this to use with my btt s2dw and found a few issues with the original model I.E. the M3 holes being modeled over size to 3.2mm so I remodeled the holes to be undersized by around 4% so your screw will create the threads.
I also added an M6 hole in the center for any nozzle mount ADXL/S2DW to work with just the M6 bolt they come with.
All holes are 6mm in depth.
It's intended to fit under a clip on the edge of the print bed. Or, print it and immediately attach the ADXL345 without removing it from the bed!
If you do leave it stuck to the bed, make sure you position it somewhere that it will not be in the way of the toolhead during resonance testing.
Not everything is perfect as my edible hit while doing this.
Resolution: 0.2mm
Infill: 20%