1 / 2
Honda CBR1100XX Super Blackbird Grab Handle Plugs — zdjęcie 1
1 / 2

Honda CBR1100XX Super Blackbird Grab Handle Plugs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plugs for the holes if you remove the rear passenger handle.

Ocena
0 / 5
Polubienia
2
Pobrania
78
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

These plugs conceal the holes when you remove the rear passenger grab handle.

You will probably need some replacement M6 bolts for the front screw holes, as the original ones may not have full thread to screw in far enough. I'm not sure about the rear bolts as I have aftermarket ones.

  1. Remove all 4 bolts from the original handle. Two will be concealed under the plastic caps usually. 
  2. Remove the grab handle.
  3. Insert and tighten the front M6 bolts against the faring.
  4. The plug sits over the front bolt. 
  5. Insert the rear bolt through the plug and into the frame.

My photos show the plugs printed at 0.1mm layer height in Prusa Galaxy Black PLA. You should only need support for the rear bolt hole.

14-06-2024 - uploaded a v2 model that's a better shape, uses less material and will print without support. Mirror the Right mirror for the Left

Tagi