Voron Stealthburner for Hypercube Evolution Rail System (HevoRS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After installing the Afterburner as a direct extruder on the HevoRS for over 3 years, it was time for something new. I…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 1278
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After installing the Afterburner as a direct extruder on the HevoRS for over 3 years, it was time for something new.
I wanted to install the stealth burner without making any major changes to the “Voron parts”. The result is this HevoRS belt block with the option of mounting the Voron Carriage. However, for stability I did make two holes in the carriage.
The follow screws are needed:
block: 5x m3x45
carrier: 2x m3x8 + 2x m3x10
belt tension: 2x m3x16 - 24
Print Settings
Printer:
HevoRS
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Filament: KVP ABS / eSUN ABS+ (Old Brand) ABS Red/Black
Notes:
I followed the Voron printing recommendations
Category: 3D Printer Parts