Yeti Rambler 36 Oz Boot Protector (96mm Diameter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boot for a 36Oz Yeti Rambler bottle (96mm Diameter). Couldn't find a good one with decent protection on Amazon.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Features cushioned corners to absorb impacts. Printed with Duramic3D TPU (95A) on a Creality K1C. Print time ~4.5 hours.
Dimensions:
50mm Tall
99mm Outer Diameter
96mm Inner Diameter
1.5mm wall thickness
4mm bottom thickness
Recommended print settings (0.4mm nozzle):
- 0.2mm layer height
- Aligned Seams
- 3 Wall loops
- 4 top, 4 bottom shell layers
- Concentric top and bottom surface pattern
- 20-30% Infill
- Triangles, Tri-hexagon, or Honeycomb infill pattern
- Maximum speed of 30mm/s across the board
NOTE: You may need to reduce the print scale to 99% based on your bottle and its manufacturing tolerances. I have noticed that while this fits my first bottle perfectly (measured diameter at 96.2mm with blue podwer coating), it fits loose on another one which I measured at 95.53mm diameter (with red powder coating).