Tesla Model 3 Interior Temperature Sensor Cover With Switch Hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to install a switch somewhere hidden and found a little cover under the monitor
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 873
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I wanted to install a switch in a Tesla Model 3 and found this little cover plate under the monitor. It hold the interior temperature sensor. Rather than cutting a hole in the OEM part, I 3D printed a new cover with a hole for a switch built into it.
The OEM cover has a slight bend to it, so I also included a mold that you can use. I used PLA for the cover (Tesla has “Cabin Overheat Protection” that makes PLA reasonable here), and PETG for the mold, so that my heat-gun would melt the PLA before the PETG.
You can see a video showing how it's used here: