Ducati Backrest Mount Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover to take the place of a backrest with the touring pack
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tested with a 2024 Diavel v4. Should work with any Diavel that is compatible with the official Ducati Touring Pack and backrest
Ducati claims the backrest is "required" to be installed with the touring pack... well that is not true. There is a crossmember that sticks out, which the backrest can mount on, but the backrest itself is not needed. I didn't want the backrest on 24/7 so I made this cover which covers up the mount that sticks out.
Use one of the original bolts to hold this in place.
Printed in ASA
4 walls
20% gyroid
Make sure to print this with the square hole on the bottom to minimize supports. I recommend tree supports at least for the bolt hole because it will sag otherwise.
I recommend preheating your chamber for at least 30 minutes because this part is very high and narrow.