1 / 11
Ender 3 v3 SE Left Bin / Bucket BUT.... for people with OCD.....
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a removable bucket for people who cant keep their hands off the build plate to get that purge line...
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 1040
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (26)Powiązane
ok i made this bucket because i cannot.... for the life of me... keep the purge line on the plate for more than 30 seconds and i constantly dump filament exces or purge lines in there, so to make it easy to empy i made it removable…
Also its wide enough to fit a full size bed scrapper,
i made the magnet holes the way that they are so you can print the models flat on the print bed. (open the 3D viewer)
* requires 12 6x2 Magnets. (to keep it in place with vibrations)
