1 / 3
Efoil slingshot motor mount for 65161 motor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My motor pod for slingshot masts. Pretty flexible and may work for other masts
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I did the nose cone in PLA or PETG.
Topclamp was TPU
Bottomclamp TPU, PETG, ABS.
Pretty flexible if you want to try other masts. Easily can swap out all the parts if needed.
Uses m5 x 100mm socket cap bolts