Backpack Accessory Celestial Charm: 3D Printed Moon Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D Model of the Moon turned miniature. Perfect for those space lovers to carry a piece of the solar system with them.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Backpack Accessory Celestial Charm: 3D Printed Moon Keychain
Printed using my Ender 3 V3 SE Printer using Kingroon White PLA. (Any PLA is acceptable and will work well with the print.)
I Printed with tree slim supports at a 45* angle and 35% Infill. (I recommend using 15% or less). Due to the weight of the print.
The Layer Height I used was 0.20mm some of the detail was lost due to this height. Additionally, because I was miniaturizing the moon on a smaller scale. But would not go any lower than 0.15mm.
Print Time took 2 hours 14 mins and 4 secs.
Here is a link to purchase the same Keychain attachments yourself:
https://www.amazon.com/dp/B086VJMNWS?psc=1&ref=product_details
Audab 360Pcs Keychain Bulk, 120Pcs Keychain Rings with Chain