KODAK Luma Bed Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headboard mounting bracket for a KODAK Luma projector.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
My wife and I wanted to project movies onto the ceiling so we could watch them from our bed. So I made a mount for a KODAK Luma. It's made for a 33.9mm thick headboard but could be adapted pretty easily for other beds (Fusion360 file included)
Hardware:
* ¼"-20 (tripod screw thread) x ¼" to attach to the projector's tripod mount
* Two small screws for the hinge. It's sized for #4-40 x ½" screws I had lying around but a M3x10 would probably also work as well. You may need to clean out the hole a little bit first (or tap it if you have a set of taps!)