1 / 4
1982 Kawasaki KZ750 Dynatek Ignition Coil Mounting Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For when one replaces the stock ignition coils with Dynatek ones that don't fit the stock bracket.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Print Settings:
- Material: CF-Nylon
- You want this to be capable of withstanding ambient heat radiating off the engine as it's relatively close when mounted
- Layer Height: 0.2mm
- Infill: 20-50%
- You want this to be strong to account for vibrations while riding
Designed specifically for the DS2 set from Dynatek that were designed for the 1982 Kawasaki KZ750.
- Includes spacers which can be used to account for the offset mounting points on the coils.
I would also suggest using a thread locker when mounting this to your bike.
Edits:
2025-04-05: Added a new variation for the DC1-1 coils sold by Dynatek