Clip for MuziWorks' Heltec V3 (H1 - Case for Heltec V3 running Meshtastic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to hold a Heltec V3 in the MuziWorks case, named "H1 - Case for Heltec V3 running Meshtastic" on printables. Can…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 1224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Clip to hold a Heltec V3 in the MuziWorks case, named "H1 - Case for Heltec V3 running Meshtastic" on printables. Can be used to mount it on the wrist or anywhere else.
There is a cut for the belt/strap up to 24mm x 2.4mm. The strap can be passed through or loop in the secondary cutout.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament: ELEGOO PLA+
Semi-transparent
Notes:
For minimal support, print it in the vertical position, with the smallest hook to the bottom. Use "support only the building plate". The middle open parts do not need support.
Category: Electronics