Nitecore EDC27 Tailswitch Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tailswitch guard for Nitecore EDC27. It replaces the original plastic that goes together with the clip. As I didn't…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Tailswitch guard for Nitecore EDC27. It replaces the original plastic that goes together with the clip.
As I didn't find any "ready available" tailswitch guard model for the EDC27, I made one myself and wanted to share it here. There are two versions, the first one has the guard for the main button, the second one can tail stand, but is more finicky to access the turbo button.
There's still some tolerances and better fitting to be taken care of, but that's pretty much what it will be.
Personally, I didn't have any problem with the tailswitch or miss activation of the EDC27, but better safe than sorry.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
Doesn't matter.
Filament: ELEGOO PLA+ / ABS
ELEGOO Matte Black
* I find that ABS is the best one here. PLA also works, but the screws get loose a little bit after some time due to PLA being softer.
Category: Parts