Beer Pong Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Funnel for filling up 10 cups at once
- Ocena
- 4,333 / 5
- Polubienia
- 49
- Pobrania
- 990
- Wydruki
- 2
- Wyświetlenia
- 3630
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a simple Beer pong funnel which I designed myself. Fits just right onto 10 standard cups and can be printed on a 230x230mm bed (e.g. Ender 3 etc). You just need to rotate it a bit in the Slicer so it uses the least amount of space in each direction.
The Model in the Picture was printed without supports. Note that it's possible to do so, but the bottom side of the “cup” could come out with some aesthetically unpleasant layers due to the extremely flat overhangs at the very tip of the sphere. That being said - consider for yourself if you want to use supports :)