1 / 3
Duronic Speaker Stand Foot — zdjęcie 1
1 / 3

Duronic Speaker Stand Foot

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Feet to increase the height of Duronic speaker stands.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Share Alike

You can print 4 of those to increase the height of the speaker stand by about 10 cm. I recommend printing in a hard material like PLA, PETG, ASA, PC etc.

I also recommend adding spherical rubber spacers so that they stand firmly on the ground.

Tagi