5 Gallon Bucket Screw Lid-Cyclone Dust Separator Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to help mate 5 gallon bucket screw on lids with a cyclone dust separators for easier dust disposal.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 1874
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Context
Cyclone dust separators are great for separating shavings and dust before they reach a shop vacuum and clog the filter. Some variants come as push down 5 gallon bucket lids that can be difficult to remove.
An alternative to push down 5 gallon bucket lids are screw on lids, however, these do not have a good section for mating the dust separators with. This adaptor provides a good way (in my opinion) to attach a cyclone dust separator with a 4 groove screw on 5 gallon bucket lid.
Printing
I printed it with 4 line walls in PETG without support. I welcome you to do what you think will work.
Construction
- Cut an 82mm hole in the top of the center of the screw on lid.
- Align the adapter to determine the screw hole locations, positioning the lid grooves in the adapter's open spaces.
- Screw the cyclone dust separator on top of the adapter, which is on top of the lid.
- Use a sealant like silicone or caulk to make the making air tight.
Creation
This is of my own design. I was unable to find something for this function, which is why I made this, but if one already exists, I am sure it is awesome.
Disclaimer
Use on your own accord and happy woodworking if you use it for that!