1 / 4
Mavic Pro Gimbal Guard / Glare Shield
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Changes from other designs Increased the FOV and added a cowl. Tested the shield to make sure it rarely enters frame.…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 752
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Changes from other designs
- Increased the FOV and added a cowl. Tested the shield to make sure it rarely enters frame.
- Made a better, tighter fit at the back clip (at least on my Mavic),
- Strengthened and thickened the base of the print so it can be printed without a raft. Notes: I don't like having to need a raft to print so I added a little box at the apex of the arch so you can add supports. As a sun shade/glare shield it seems to work about as good as you might expect. I do feel better about the exposed gimbal when I have this on. I've shot a bunch of footage with this shield and the intrusion into the shot is far less than others I've tried.
Category: R/C Vehicles