Mavic Pro Getterback side saddle mount (with optional flasher)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When flying out over deep water (obviously not a pool as picture) you can increase your chances for recovery with a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
When flying out over deep water (obviously not a pool as picture) you can increase your chances for recovery with a Getterback locked to your Mavic Pro.
The Getterback (available from their website) is designed to release a float after being submerged for any duration. It will release in 10 minutes and should allow for recovery in water up to 100'.
If you add the optional flasher, you can only increase your chances of finding the float in the water, especially if you're flying at night. The flasher will run on fresh batteries for a couple of days.
These are the flashers I used. https://www.amazon.com/gp/product/B00L1UPKLC/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1
NOTE: Shortly after making the original design - where the GetterBack was mounted on the top - I realize there was a 50/50 chance the sinking Mavic might settle on its top preventing the float to deploy. So in this revision places the GetterBack on the side - reducing that risk.
Double Dog Note: I've added a version with two GetterBack saddles - I've not tested the print but in theory it should work as well as the single. Please give me feedback if there are problems with the dual saddle design.
Category: R/C Vehicles