Power Strip Rocker Switch Cover (Customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to prevent accidental toggling the rocker switch on power strips.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 4
- Wyświetlenia
- 1162
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
The rocker switch cover is meant to be attached to a power strip by velcro wire straps or some other kind of velcro tape. For a more permanent attachment zip ties can be used as well.
With its inner dimensions of 20mm x 25mm x 10mm it fits on all power strips I have at hand. If you need a different size, use the customizer of OpenSCAD to make it fit.
There is a version with holes to let the indicator light shine through. If you are using a transparent / translucent filament, your power strip doesn't have such a light, or you want to cover it, use the regular version.
The blue one in the picture is printed in PLA, the other one in PETG.
Recommended print settings:
"0.20mm Quality" preset of PrusaSlicer with modified extrusion width (Advanced):
Print Time:
19 min for either version with modified extrusion width or 22 min with unmodified 0.20mm Quality profile.