Raspberry Pi 4 quality case, with VESA mount (V3.3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi 4 case, with VESA mount (V3.3)
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Just another case for Raspberry PI 4 without active cooler (may not needed).
Slightly everything holds together without any screws.
That is nice if you must open and close it many times.
There are two types of cover. One is without screws at all.
The other I recommend the two screws in the front (2 x 2.5mm/8mm, countersunk ).
The other four screws on top are 2.0mm (Notebook screws).
A wide opening on the back allows to remove the cover and also the handling of the SD card.
Thank you Matthias, for your ideas to improve that model.
Support & Feedback
I share my designs purely for fun and don't make any money from this. If you like this model or find it useful, please consider leaving a Like (❤)!
Posting a Make or leaving some feedback in the comments makes my day and helps me improve future designs. Happy printing! 🚀