Costa Harpoon style arms for Frigate and Man O War
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now that I've gotten more experience under my belt, and a new set of Costa's that I feel are more comfortable, I…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Now that I've gotten more experience under my belt, and a new set of Costa's that I feel are more comfortable, I remodeled the arms for my friend who still has a set of Frigates. These are much smoother and have better geometry.
I love the way my Harpoons feel, so these are modeled off of them and he seems to like them better as well.
Print Settings
Printer:
Alfawise Delta
Rafts:
No
Yes
Resolution:
.16
80%
Filament: Hatchbox ABS, or other high temp material Black
Notes:
I brought mine up about 3mm to give the whole bottom even supports, enabled a 1mm support roof, then gave it a .2mm Z support distance.
I did a bit of sanding to get rid of the layer end seams, then hit it GENTLY with a heat gun to clean up the surface. Just make sure you don't heat it up enough to warp it, but that's the same reason I chose ABS instead of PLA.
Category: Glasses