Lelit PL91T Hex Grid modular system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I would like to have a better organizaton of my Lelit Victoria cup warmer. So I decided to make something useful.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
It happened to knock off something from my espresso machine top, so I decided that I should make an improvement.
I've designed and printed this grid, with magnetic foots and modular stands to place and organize things on the top of this very compact and performant espresso machine.
Instructions:
Print the base grid and at least 5 foots
Choose magnetic foots or normal foots
Note: Magnetic foots needs to be paused at correct height to insert a 6x3 magnet.
Print 3 hex spacers
Print the Base Border (long or short)
Material
PETG: best for heat resistance and flexibility
PLA: not recommended
Optional:
There's a hex compatible Umikot 58mm base, that can be hold with pins
May use some spacers to organize the top space.
Assembly instructions:
The base grid should fit by pressing with a little/moderate force, magnet will do the rest to keep the grid in place.
It should work also for Grace (57mm version of PL91T) but didn't tested, except for the Umikot 58mm base.