GoPro Mount for Rollbars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A GoPro mount for ~45mm (1.75-1.77in) rollbars. Made for Blackbird Fabworx GT3 and Hard Dog "Hard Core" Miata rollbars.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A GoPro mount for 45mm (1.75-1.77in) rollbars! Made for Blackbird Fabworx GT3 and Hard Dog “Hard Core” MX-5 Miata rollbars. The model has clearance for felt strips (or other non-marring material) around the clamps to help dampen vibrations and prevent scratching of the rollbar.
The print will work with any other rollbar of similar dimension, and the felt inserts could be thickened for smaller bars as well.
Caution: The mount is 47.6mm ID to accommodate the width of the felt. Without the felt inserts it may be loose for the intended rollbars.
Hardware:
You can use GoPro hardware or purchase M5 x 0.8mm nuts and bolts. Felt strips can be found in hardware stores or online. For example: https://a.co/d/gzyaEoD
Printing recommendations:
Print with supports and the mounts laying horizontal on the print bed. Some finishing with a file is required within the “ears”. I've used PLA for this print without warping for over a year in my Miata with a hardtop. Your experience could be different on an open top car where the sun hits the mount.
Buy one already made:
You can purchase a premade mount with hardware included here: https://buymeacoffee.com/castillaricardo/e/262705
Thank you:
I hope you find this model useful. And if you're able, I would appreciate if you buy me coffee! https://buymeacoffee.com/castillaricardo