Airbrush Paint Spray Booth Exhaust Fume Filter Holder Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a dual layer 22mm thick x 185mm tall (~0.8" x 7.3") Thick airbrush filter, using 2 brackets for adjustable width.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 2553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a quick and simple bracket to hold the commonly available “blue and white” (on amazon) 2 layer, 22mm thick airbrush spray booth filters. The filters themselves typically measure 22mm x 185mm x 405mm (or close to that, 0.875" x 7.3" x 16"), I believe the original source of this size is from Master Airbrush brand, and I was looking for a way to mount them to a DIY spray booth I made. The brackets are about 50mm (2in) wide and can be places at whatever width works for you. These don't include any mounting hose, as I just glued them to the spray booth itself. I've included the project files (Autodesk Inventor 2023 .ipt files) if you'd like to modify them for your own needs in any way.
Filter that I bought/used:
https://www.amazon.com/dp/B0CYGJ4KMN
These are pretty common, though, and you can find multipacks of the same dimension (or close, sometimes they approximate the measurements on the listings) easily:
https://www.amazon.com/dp/B0BVTCLCR5
https://www.amazon.com/Master-Airbrush-Paasche-Enterprise-Airhobby/dp/B08NY16GGF