HSW detachable Buckets/Boxes (square)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
detachable buckets for HSW in different sizes
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 239
- Wydruki
- 4
- Wyświetlenia
- 742
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are buckets for the honeycomb storage wall (There is also a round version.) Just print the bucket with the same size holder. Also the buckets snap in place with a satisfying click. BTW the render was my first in FreeCAD so dont judge me.
My recommended print settings:
* 0.4mm nozzle
* 3 walls
* 0.2mm layer height (if the overhangs dont print cleanly, you might want to choose 0,12mm)
* 20% infill
* 200 mm/s (reduce speeds at overhangs)
* supports: depending on how good your 3d printer can handle overhangs you might need supports. On my Elegoo Neptune 4 Plus it printed just fine.
I also made some other versions. Check them out before printing. You might like them better: HSW removable Buckets/Boxes (round), HSW removable Buckets/Boxes (square).
Happy printing!