Gridfinity parts bins with either a round or square interior
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two parts bins, in round and square that are 2x2x5, Gridfinity compliant, and stackable.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 659
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Gridfinity 2x2x5 parts bin. One with a round interior and the other with a square interior.
I print these with the built-in PrusaSlicer “0.20 Speed” profile, but change the layer height to .30. This is optional, of course, but it works just fine and saves time over 0.20. I also changed the Perimeters setting to 3, the infill to Gyroid at 10%, and the seam to random, but that is my personal preference.
If you find anything that can be improved, please post a make and/or leave feedback. I am always looking to get better.