XYL Unicorn Buffer Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and durable buffer tube for the Unicorn blaster by XYL
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 875
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
nothing real special to say here.. just print it at four or more walls and 20% gyroid infill with the flat side of the model facing the bed and supports under the two pegs and seven holes. just remove the orange back plate, and slide the pegs into the stock holes, then screw it in with the original 2 screws, being sure not to over-tighten them. with seven positions and being able to prime the heaviest available spring off of your shoulder, it might not be the prettiest, but it's definitely the best option out there so far. the only thing it isn't good for is being compatible with the long spring kit from Blackraisins, but theres another tube somewhere here on printables that is… with that being said, enjoy your comfier stock options!