Wheel center cap for gram lights 57s v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits 16" wheels for sure, but may also work for 17, 18, 19". I'd recommend a test print of 1 cap to be sure.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed this in 95A TPU. This really requires some sort of flex, so use something that has some give. Do NOT bother to print this with PLA - clip prongs WILL snap off on install attempt.
The great part of 3d printing is that you can use whatever color you want. I recommend black, as it will match window trim and/or side mirrors. Matte black may look better if you can find something flat enough to replicate tire color.
You can probably remix this to fit a lot of wheels if you print a small measuring tool and can get the depth of your center caps' inner rims. That should allow you to scale the Z dimension for the inner rim depth and the X / Y for the rim diameter.