Box for 3x King Size Cones | Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful little box to carry 3 king size cones on you.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Useful little box to carry 3 king size cones on you.
Box outer dimensions are ~ 116 x 55x 16 mm.
It has a logo in the top that can be painted in slicer using the fill tool.
If you don't paint the logo, it won't show up in the print at all.
To keep it closed, there's embedded magnets - the magnets are cylindrical 5mm diameter x 5mm length.
Make sure you set them in in the correct orientation and set the pause at before layer 37 (if you print in 0.2mm layer).
I'd recommend putting a drop of ca glue into the hole before adding the magnet to make sure it's in. If you use a steel nozzle, it could otherwise pull the magnet out when going over it.