Qbrick parametric buckets

Here is an original design with parametrization

https://cad.onshape.com/documents/ff98f098f21e4ecdfb127b8b/w/78c94b868634fcaf98c1a49b/e/ebd93f37b3c48a5bd89299b4?configuration=column_size%3D2.0%3Bheight%3D0.053%2Bmeter%3Binside_cells%3D3.0%3Binside_columns%3D2.0%3Binside_point%3D1.0%3Bmargin%3D0.005%2Bmeter%3Bsize%3D1.0%3Bwall_thicknes%3D0.0012%2Bmeter&renderMode=0&uiState=665f61166fd503278b828234

Description of parameters:

• size - length of bucket - 1 or 2 slots
• column_size - width of bucket, 2 mean wider one
• inside_cells - amount of cells inside bucket
• inside_columns - amount of columns inside bucket
• wall_thickens - could be used for optimization depending of used nozzle
• margin - size of top margin of the bucket
• height - height of the bucket - default is 53mm
• inside_point - 1 mean enable notch

Due to many different combination I included only few exported models.

Time to time rendering proper bucket is buggy, so if you get any problems please contact me.