1 / 2
Another Bambu Build Plate Holder 10x — zdjęcie 1
1 / 2

Another Bambu Build Plate Holder 10x

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

10X Plates

Ocena
4,5 / 5
Polubienia
30
Pobrania
233
Wydruki
1
Wyświetlenia
714
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

After rearranging my workshop, I had an issue with pulling the plates upward from my previse design for the K1 Max and keeping all of the different plates I had for the BambuX1 accessible to me with ease.

When I looked around I cam across tangcla remix and I thought that should work if only, sized to the K1 Max and multiplied for the X1, So I started working on it.

 

Modification for X1C:

  • Trimmed it a little from the front and back.
  • Duplicated the holder.
  • Mirrored it.
  • Joined everything together.

I ended up with a holder for 10x plates for the X1C.

Now I have lower profile and I can pull the plates out when needed without the lifting up part.

Two files are included, one with Support Legs (Not Necessary) and one without them (Recommended).

(The 3MF files are from Bambu Studio)

Tagi