1 / 5
A holder for screwdrivers with 9mm and 13mm diameter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 186
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (46)Powiązane
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.