Mini Thermometer / Hygrometer 2020 Groove Mount, Round or Rectangular
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020 extrusion mounts for common 41mm round and 45mm x 26mm rectangular humidity / temperature sensors.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
2020 extrusion mounts for common 41mm round and 45mm x 26mm rectangular mini thermometer/hygrometers., for quick temperature and humidity checks in 3D printer chambers.
If you like this and need parts or supplies related to it, please support my work by using the following affiliate links to purchase them. I believe these to be the best choices available for this feature at the time of posting. You will need:
One of Mini-Thermo/Hygrometer:
(Rectangular, Celsius): https://amzn.to/4eLNL4H
(Rectangular, Fahrenheit): https://amzn.to/3zxTdrG or https://amzn.to/4ctvDv6
(Circular with C/F switch): https://amzn.to/3XQXQaJ or https://amzn.to/3VKEUHO
2 M3x8 Non-Countersunk Screws:
Just the screws (stainless) https://amzn.to/4cnhDTu (black): https://amzn.to/3XG5q7T
In a kit, (stainless): https://amzn.to/3zxFgtM (black): https://amzn.to/3L82qJY
2 M3 T-Nuts:
Just the t-nuts: https://amzn.to/3RNlctG
In a kit: https://amzn.to/3VJxRPH
Allen / Hex Drivers:
L-style: https://amzn.to/3xFZi4U
Driver-style: https://amzn.to/45Lk9jI
Low to medium strength thread locker. One of:
Loctite 222, 6ml: https://amzn.to/3zpIShE
Loctite 222, 50ml: https://amzn.to/3L7HHG2
Loctite 609, 50ml: https://amzn.to/3VOEnVe
Off-brand 222-type, 50ml: https://amzn.to/3L5cQd9
NOTE: Thread locker is not about preventing loosening in this case. It is about friction-locking the t-nut to the screw, to make future maintenance much easier. After about a day of curing with thread locker, the t-nut will much more readily turn in the extrusion groove as is needed for moving or removing the part. Once you experience this, you'll never use a t-nut again without it.
INSTRUCTIONS:
- Insert screws through mount screw holes.
- (Optionally) Add one drop of thread locker to the threads at the end of the screw.
- Turn the t-nuts onto the M3 screws, just enough that they will reliably not shake off.
- Align the t-nuts so they can go into the extrusion and put them in.
- Slowly at first so the t-nut turns in the groove, tighten the screws until well fastened.
Enjoy!