Rotary Chuck mount for 30oz Tumblers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this so that you could place a tumbler into a Rotary Chuck and engrave all the way to the edge.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this for the wecreat laser rotary attachment. It will also work with the X Tool Rotary. I did embed the coordinates the center edge of the cup should line up when selecting one hundred millimeter as the diameter in the Wecreat software. All you have to do is remove a gasket from one of your lids and place in the groove. I always increase the number of walls and it helps with the strength. This will be dependent on your filament and printer. I use a PLA plus and have had no issues with it being crushed. by the jaws on the Chuck.