3D printable reactor for reproducible photochemistry in batch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple reactor design to provide the tools for any chemistry lab to perform state of the art photochemistry
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
Additional information on this system and characterization can be found here : https://doi.org/10.1039/D4RE00081A
Modifiable files can be found here: https://github.com/Noel-Research-Group/3D-printed_UFO_Reactors
The reactor is designed with several parts that can be clipped or glued together.
The bottom part attaches the reactor to a magnetic stirring plate (Heidolf or IKA).
The box is the core or the reactor and ensures that the light is not leaking out of the reactor.
The reflector is located vertically under the lamp to disperse the incident light and spread it towards the reaction tubes.
The top cover comes with different variations depending on how many positions are required.
A fan shall be glued to the bottom of the reflector to provide cooling and obtain a constant temperature.
All parts should be covered with reflective tape to reflect light towards the reaction mixture.