3D printable reactor for reproducible photochemistry in continuous flow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple flow reactor design to provide the tools for any chemistry lab to perform state of the art photochemistry
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
Additional information on this system and characterization can be found here : https://doi.org/10.1039/D4RE00081A
Modifiable files can be found here: https://github.com/Noel-Research-Group/3D-printed_UFO_Reactors
The reactor is designed to have all the parts clicking together, they can also be glued together for a better sturdiness
The reactor and feet have to be printed with support. A fan has to be attached to the bottom to provide efficient cooling and a stable reaction temperature in the system.
The box is the core of the reactor and keeps the light from escaping the system.
The top cover clicks onto the box and is here to fit the vertical lamp.
The holders for the reaction coil are in two parts and click together. The tubing can then be wrapped around the pillars. Magnets can be inserted by pausing the print, it will result in a more user friendly system.
All the parts shall be covered with reflective tape to reflect the irradiation from the light source.