Broil King Porta Chef 320 - height-adjustable feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was annoyed that our barbecue (Broil King - Porta Chef 320) always stood at an angle because the terrace was not…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was annoyed that our barbecue (Broil King - Porta Chef 320) always stood at an angle because the terrace was not level and the sausages would roll off the barbecue. So I made four height-adjustable feet (max. ~2.5 cm) that can be used without making any changes to the barbecue and can also be quickly removed again for transportation.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: any ABS-GF / TPU
gray / white
Notes:
The ABS-Parts (ASA or PETG would also work) are printed with 4 walls and support.
The "bumper" is printed in TPU with 20% infill and only under the hole with 50%. I think it's only needed when not glued.If you don't glue the "bumper", you can screw them. I've used M4x14 and M4 thread inserts in the "screw".
To fix them at the table legs you can use M4x10 directly oder M3 thread inserts with M3x10.
Category: Outdoor & Garden