1 / 1
Gauge 1 Model Railroad Curved Track Short Pieces
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project adds two shorter curved track segments that can be printed on an MK4 printer.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
Here are additional curved track models, one radius 600mm x 15 degrees, and the other radius 1200mm x 9 degrees. They are sized to fit on an MK3/MK4 printer bed. A non-MMU user can change the filament at the height of 5mm to achieve nearly the same result as an MMU user.
These are for use with the Hume track system. See https://www.printables.com/model/902291-snap-together-gauge-1-model-railroad-track
for the parent project.
These are designed for PETG and do not need support.