Y axis limit switches for Vevor 3018 CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Ghruum's Y axis endswitch holder plus new actuator wing, fitting my Vevor 3018 CNC.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Y endswitch holder was the only part of Ghruum's collection that I could use for my Vevor 3018 CNC. Fortunately, he provided a STEP file, so I could isolate it from the other parts. I also added a new actuator wing. The whole design is quite specific to that machine and my use case … but maybe it helps somebody else :)
Print one limit switch holder as-is and one mirrored. Screw the limit switch to the holder with two M3 screws. Screw the limit switches to the Y support rail using T nuts and M4 screws. Screw the actuator wing to the table using two M6 screws and T nuts. Adjust the position of the switches to trigger shortly before the table bumps into the front and back walls.
My X axis limit switches here:
https://www.printables.com/model/903929-x-axis-limit-switches-for-vevor-3018-cnc