1 / 1
Motherboard Fan Silencer for 3DPrintMill CR 30
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The stock motherboard fan was too noisy, I tested it with my phone at over 65db, so I made this and after I measured…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock motherboard fan was too noisy, I tested it with my phone at over 65db, so I made this and after I measured it with my phone app, it reduced it by about 5db
原装的主板风扇实在太吵,我用手机测试超过65db,所以我做了这个,经过我用手机app的测量,降低了约5db
Print Settings
Printer:
3DPrintMill
Rafts:
No
No
Resolution:
0.2mm
10%
Filament: ESUN PLA+
Category: 3D Printer Parts