Lynx, Minx, Lonx 2.1 Ball Detent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification of the pump and shroud for the beta Lynx, Minx, and Lonx 2.1 with slot for a ball detent.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 261
- Wydruki
- 2
- Wyświetlenia
- 1313
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified shroud and pump for the Orion Blaster Lynx, Minx, and Lonx 2.1 beta to add a ball detent. This locks the priming grip in the foward position so it doesn't move around easily. Uses a 6x7mm ball detent, the same kind that is used in the Alchemist.
There are 2 version -
V3 is a looser fit that will require a dab super glue to secure the detent and require less pressure to disengage the detent.
V4 is a tighter fit, detent should is pressure fit, doesn't require superglue - must be printed with layer height of .2 or lower, have a more clicky feel and require a bit more force to disengage the detent.
I got my ball detent on Amazon (https://www.amazon.com/20Pcs-Plunger-Stainless-Positioning-Spring/dp/B08SWDZ8ZG/) but the one on Out Of Darts should also work.