Volkswagen Vannagon/Synchro Adjustable Vent Replacement 255819951A01C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement vent for the VW van roof vents, adjustable rotation and angle like original vents. 255819951A01C
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 816
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Replaces ceiling vents in VW Vanagon and Synchro vans, made to same dimensions as original vents.
Materials
Printed components and original mounting screws
Assembly
Align the Vent flaps and attach them to the linkage plate, putting the control flap in the middle.
Slide flaps and linkage into the cylinder, make sure the pins on both sides of each flap are seated
Slide the cylinder into the frame to complete the vent.
Sanding or adjustment of extrusion multiplier may be required for the correct fit and smooth rotation.
Printing
PLA - If you are planning on running heat through the vents use a filament with higher temperature resistance.
0.2mm Layer Height
Infill 20%
Support on build plate for Cylinder and Control Flap