.22lr Tikka Camo ammo box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made different brands before for .22lr ammo box so i make a camo version as well. The spacing is 50pcs/25,4x6,14mm.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 1321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made different brands before for .22lr ammo box so i make a camo version as well. The spacing is 50pcs/25,4x6,14mm between the insert top and the bottom. And the total height is 28mm between top and bottom.
I have made 2 minor improvements. I have made a 0.2 mm clearance between the lid and the bottom to eliminate pinching near the hinge that can happen to any material more or less. But the tongue and groove is the same. And a few aesthetic changes to the hinge. A part from that it is exactly the same box as my .22lr TIKKA.
I use 1,6mm stainless tig-welding pin for the latch and hinge system. But any 1,6mm rod will work just fine.
You can print it in any material but i strongly suggest you print the latch in ABS or similar.
The camo parts are named for easy slicing.
Hope you like it.