Aquarium Light Raiser (Rimmed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is used to raise the lights off the edge of aquariums. Both for tanks <10 gallons and tanks >20 gallons
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 380
- Wydruki
- 0
- Wyświetlenia
- 1169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
Hello, this is my first model I have uploaded but not the first model I have designed so please let me know about any possible modifications I should look into.
This is a simple aquarium light raiser for rimmed aquariums.
Should be printed with at least 10-15% infill and should be printed upside down where the light legs go into, touching the build plate. You will most likely need supports but that is up to you own preference and your printers ability.
The smaller one is used for tanks with smaller rims, so tanks with 10 or less gallons should use the smaller raiser, for larger tanks over 10 gallons, use the larger raiser.
Let me know of any comments or questions!
It may work for most lights but I am currently using a cheap amazon light (AMZBD LED Light), should work for most “thin legged” lights…