1 / 2
Doppelzahnrad 110-127 für Bernardo P600G, Double gear 110-127 for Bernardo P600G — zdjęcie 1
1 / 2

Doppelzahnrad 110-127 für Bernardo P600G, Double gear 110-127 for Bernardo P600G

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Doppelzahnrad für zöllige Steigungen 11, 22 & 44 GG. Double gear for imperial threads with 11, 22 & 44 tpi.

Ocena
0 / 5
Polubienia
2
Pobrania
26
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Doppel-Zahnrad / Wechselzahnrad mit 110-127 Zähnen für den Antrieb des Vorschubgetriebes an der Drehmaschine Bernardo P600G zum schneiden zölliger Gewindesteigungen. 
Mit diesem Doppelzahnrad anstelle des originalen 120-127 sind die Steigungen 11, 22 & 44 Gänge pro Zoll möglich wie z.B. zölliges Rohrgewinde mit 11 GG/". Hebelstellungen siehe Tabelle. 

Müßte auch an baugleiche Modelle wie HBM 280x600, Paulimot PM 3700 oder Warco GH 600 passen.

Gedruckt mit Prusa MK4
PLA
3 bis 4 Perimeter
50 % infill
Position der Naht: zufällig

Achtung: Für einen paßgenauen Sitz muß die 14mm Bohrung mit einer 14 H7 Reibahle auf genaues Maß gebracht werden!!

Falls es jemand druckt und verwendet, bitte um Rückmeldung ob es auch wirklich an den anderen genannten Drehmaschinen paßt.
……………………….
Double gear / change gear with 110-127 teeth for driving the feed gear on the Bernardo P600G lathe for cutting inch thread pitches. 
With this double gear instead of the original 120-127, pitches of 11, 22 & 44 threads per inch are possible. For example cylindrical Withworth pipe thread with 11 tpi.
See table for lever positions. 

Should also fit identical models such as HBM 280x600, Paulimot PM 3700 or Warco GH 600. 

Printed with Prusa MK4 
PLA 
3 to 4 perimeters 
50% infill 
Position of the seam: random 

Attention: For a perfect fit, the 14mm hole must be brought to the exact size with a 14 H7 reamer!! 

If anyone prints and uses it, please let me know whether it really fits the other lathes mentioned.

Tagi