1 / 3
RYOBI 18v battery flange/holder replacement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your battery flanges broke off, like mine did, then this replacement should keep the battery in place.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
My Ryobi One 18V grass trimmer tipped over and the flanges for the battery holder shattered. Making it unable to keep the battery in place. The trimmer works fine so instead of throwing it away I decided to make a holder to attach the battery.
- This SHOULD work on any Ryobi 18V tool. Please comment if you use if for anything other than the grass trimmer.
- You might need to Dremel out the sides of the broken side to be able to attach the ring. See picture.
- At least 2x M3 8mm bolts are needed to attach the parts together.
- This is not a 100% snug fit, the ring tends to drift a bit. So I added screw holes if you want to drill out some holes and fasten the ring with bolts. Super glue might work fine as well.
No supports needed but the flange itself might benefit from one, depending on your printer and settings.
Enjoy and please comment if you print it!