Aquarium Under Gravel Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aquarium Under Gravel Filter I designed this to be easier to print than existing under gravel filters. It is 140 x 140…
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Aquarium Under Gravel Filter
I designed this to be easier to print than existing under gravel filters.
It is 140 x 140 x 10 mm and can be scaled in cura to fit other size tanks.
Base pieces can be cable ties together.
Uplift tube is hole is 20mm diameter, you may need to adjust Horizontal Hole Expansion for correct size. I just measured hole after printing and adjust size of my uplift tube diameter to match.
Print Settings
Printer:
Geeetech E3D V6
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
1%
Filament: Generic PETG, PLA, PLA-F Any
Notes:
First layer printed at 20mm/s.
3 walls, 1% infill (allows filling gap between walls)
Category: Pets